Design of a sailing with geometrically combined surface.conceptual model
DOI:
https://doi.org/10.18372/2415-8151.4.6266Keywords:
The directing curve, forming surfaces, a contour of a compartment of the surface, the combined surface, a base surface, conceptual model.Abstract
The conceptual model of a sailing by application of methods of geometrical modelling, principles of industrial design and CAD technologies is developed. Variants of functional use of offered model for various working bodies are resulted.References
Kolotov SM. Nachertatelnaya geometriya / S.N. Kolotov, M. F. Evstifeev, V. E. Mihaylenko i dr.- Kiev: «Vyisshaya shkola», 1975.- 365 s.
Gyachev L.V. Teoriya lemeshno-otvalnoy poverhnosti / L.V. Gyachev.- Zernograd: Gosgortehizdat, 1961.- 317s.
Shestopalov K.K. Mashinyi dlya zemlyanyih rabot: ucheb. posobie / K.K. Shestopalov.-Moskva: MADI, 2011. - 145 s.
Voloshinov D.V. Teoriya avtomatizatsii proektirovaniya ob'ektov i protsessov na osnove metodov konstruktivnogo geometricheskogo modelirovaniya D.V. Dis. dokt. tehn. nauk. / Voloshinov.- SPb, 2010.
Zhuraeva T.H. Postroenie 3D modeli lemeshno-otvalnoy poverhnosti v AutoCAD 2010 / T.H. Zhuraeva, E.Z. Usmanov // «Grafika XXI veka». Tezisyi dokladov XIII Mezhdunarodnoy studencheskoy nauchno-tehnicheskoy konferentsii, 4-8 oktyabrya 2010 g.- Sevastopol: SevNTU, 2010.¬- S.63-65
Zhuraeva T.H. Voprosyi optimizatsii geometricheskih parametrov rabochih organov s lemeshno-otvalnoy poverhnostyu / T.H. Zhuraeva // Trudyi mezhd. nauchno-metodicheskoy konferentsii «Sovremennoe sostoyanie, razvitie inzhenernoy geometrii i kompyuternoy grafiki v usloviyah informatsionnyih i kompyuternyih tehnologiy» 16-17 noyabrya 2011 g.- Almatyi, 2011g.- S.183-193
Kuchkarova D.F. Modelirovanie napravlyayuschey krivoy lemeshno-otvalnoy poverhnosti zadaniem konki / D.F. Kuchkarova, T.H. Zhuraeva // Prikladnaya geometriya i inzhenernaya grafika. Mezhvedomstvennyiy nauchno-tehnicheskiy zbirnik.- Kiev, 2011.- Vyip. 87.- S.248-253.
Kuchkarova D.F. Dizayn-razrabotka kontseptualnogo korpusa lemeshno-otvalnogo pluga na osnove geometricheskogo modelirovaniya / D.F. Kuchkarova, T.H. Zhuraeva // Teoriya i praktika dizaynu.- Kiev: NAU, 2011.-Vyip. 1.- S.46-52
Zhuraeva T.H. Razrabotka geometricheskoy modeli rabochey poverhnosti otvalov Meliorativnoe i selskohozyaystvennoy tehniki / T.H. Zhuraeva // Materialyi mezhdunar. nauchno-prakti-cheskoy konferentsii «Rol melioratsii vodnogo hozyaystva v innovatsionno razvitii APK» .- Moskva: MGUP, 2012. -Ch.VII.- S.43-52
Zhuraeva T.H. Dizayn-razrabotka rabochey poverhnosti po traektorii dvizheniya chastits / T.H .Zhuraev, N.M. Egamov, K.K. Amonova // Materialyi XI mezhdunarodnoy nauchno-tehnicheskoy konferentsii "AVIA-2013" 21-23 maya. -Kiev: NAU, 2013.-Tom 4.- S. 26.79-26.83
Zhuraeva T.H. Geometricheskoe modelirovanie kombinirovannyih poverhnostey rabochih organov Meliorativnoe i selskohozyaystvennoy tehniki. / T.H .Zhuraev // Sb. trudov XI respublikanskoy nauchno-prakticheskoy konferentsii «Sovremennyie problemyi selskogo i vodnogo hozyaystva». -Tashkent, 2012.- S.363-364
Sham Tickoo, Gaganjeet Singh Sethi. CATIA V5R21 for Engineers and Designers. Tickoo Sham, Singh Sethi Gaganjeet. CADCIM Technologies, 525 St. Andrews Drive Schererville. IN 46375, USA 2013.
Production design. Principles, tools and techniques. ME 1007 Design principles. Concept selection. [Elektronnyiy resurs]. Rezhim dostupa: http: //www.product_design_principles.pdf.- Nazvanie s ekrana.
Patentyi: SU1732826 (A1) - 1992-05-15 Plow for flat plowing, SU1340605 (A1) - 1987-09-30 Plough base, SU686647 (A1) - 1979-09-25 Plough bottom. [Elektronnyiy resurs]. Rezhim dostupa: http: //www.Espasenet_patentniy.- Nazvanie s ekrana.
Perevodchik Google dlya biznesa –Instrumentyi perevodchika Perevodchik saytov Sluzhba "Analiz ryinkov"
