REGULAR WEAR DETONATION COATINGS ON TITANIUM ALLOY VT-22

Authors

DOI:

https://doi.org/10.18372/0370-2197.1(102).18417

Keywords:

titanium alloys, detonation coatings, wear, tribological structures, tribological systems

Abstract

The paper presents the results of experimental studies of the wear process of detonation coatings and counterbodies and compares them with other types of coatings, obtaining wear characteristics. The characteristics of wear of coatings are described in an analytical form, as well as the results of the study of tribological structures. The tribotechnical characteristics of detonation coatings are determined, taking into account the properties of dissipative structures that are self-formed in contact with friction. The effectiveness of the method of researching the process of wear of detonation coatings has been determined. It has been established that when coatings are rubbed against chrome, the total wear of the friction pair is significantly less than when rubbed against bronze. This is due to the best tribotechnical properties of chromium in the experimental field. The coefficient of friction of electrochemical chromium coatings is of the same order as when rubbing on bronze. The total intensity of wear of the coating and the counterbody when rubbing against chrome is somewhat lower than when rubbing against bronze. Since tribological structures are formed from complex oxides, asphaltenes, cokes, etc. during friction of coatings on chrome alloy VT-22, therefore the tribotechnical characteristics of such systems are somewhat lower than in systems that include bronze.

Author Biographies

 Myroslav Kindrachuk, National Aviation University

 Doctor of Technical Sciences, Professor, Professor of the Department of Applied Mechanics and Materials Engineering, National Aviation University

Nataliia Stebeletska, SS NULES of Ukraine  “Berezhany Agrotechnical Institute”

candidate of  Technical Sciences, Associate Professor of  the Department of Applied Mechanics and Technical Servise SS NULES of Ukraine  “Berezhany Agrotechnical Institute”, St. Akademichna, 20, Berezhany, Ukraine, 47501

Volodymyr  Kharchenko, National Aviation University

head of laboratory of the Department of Applied Mechanics and Materials Engineering, National Aviation University, 1 Lubomyra Huzar Ave., Kyiv, Ukraine, 03058

Mykhailo Hlovyn, National Aviation University

PhD student of the Department of Applied Mechanics and Materials Engineering, National Aviation University, 1 Lubomyra Huzar Ave., Kyiv, Ukraine, 03058

 Ivan Kostetskyi, National Aviation University

 PhD student of the Department of Applied Mecha-nics and Materials Engineering, National Aviation University, 1 Lubomyra Huzar Ave., Kyiv, Ukraine, 03058

References

Krylov K.A. Khaimzon M.E. Dolhovechnost Uzlov Trenyia Samoletov. – M. Trans Port 1976. – 183 S.

Aksenov A.F., Polishchuk I.E., Kulgavii E.A. Sostoyanie i perspektivi ispolzovaniya antifriktsionnikh pokritii na titanovikh splavakh // Trenie i iznos. 1982. –T.3.

Bartenev S.S., Fedko Yu.P., Grigorov A.I. Detonatsionnie pokritiya v mashinostroe nii. – L.: Mashinostroenie, 1982. – 215 s.

Iushchenko K.A,, Borysov Yu.S., Kuznietsov V.L., Korzh V.M. Inzheneriia poverkh-ni.- K. Nauk. Dumka, 2007-558s.

Evtektychni kompozytsiini materialy na osnovi perekhidnykh metaliv z tuhoplavkymy

fazamy vtilennia: [Panarin V.Ie., Kindrachuk V.M, Loboda P.I., Titov V.A. ta inshi].- K: NAU, KPI, 2015.-239s.

Samsonov G.V., Epik A.P. Tugoplavkie pokritiya.–M.:Metallurgiya, 1973.– 400 s.

Zedginidze I.G. Planirovanie eksperimenta dlya issledovaniya mnogokompo-nentnikh

sistem. –M.:Nauka, 1976. – 390 s.

Zeldovich Ya.B. Peremezhaemost v sluchainikh seredakh UFN, . – 1987. – T. 152,

vip. 1– S. 33–41.

Published

2024-03-30

Issue

Section

Проблеми тертя та зношування