COMBINED METHOD OF SURFACE HARDENING OF HIGH-SPEED STEELS

Authors

DOI:

https://doi.org/10.18372/0370-2197.3(100).17896

Keywords:

steel P6M5, nitro-titanizing, nitro-chromizing, discrete laser treatment, friction, wear resistance

Abstract

The structure, phase and chemical composition, microhardness, and microbrittleness of the surface zones of P6M5 steel after chemical and thermal treatment: nitriding followed by titanium and chromium plating are considered. Metallographic and micro-X-ray spectral analyzes of wear surfaces of P6M5 steel with different types of coating were carried out. It is shown the dependence of physical and mechanical properties of complex coatings and discrete laser treatment on wear-resistance. The analysis of the obtained data showed that azochromic coatings with additional strengthening by laser treatment of steel, which serves as a substrate for coatings, increase its performance in extreme operating conditions, excluding its crushing, chipping and peeling.

Author Biographies

 Myroslav Kindrachuk, National Aviation University

Doctor of Technical Sciences, Professor, Professor of the Department of Applied Mechanics and Materials Engineering, National Aviation University

 Volodymyr Kharchenko, National Aviation University

head of laboratory of the Dep. of Applied Mechanics and Materials Engineering, National Aviation University

 Volodymyr  Marchuk, National Aviation University

doctor of Technical Sciences, professor Department of Logistics National Aviation University

Ihor Humeniuk, National Aviation University

 doctoral student, , National Aviation University

 Mykhailo Hlovyn, National Aviation University

 PhD student of the Department of Applied Mechanics and Materials Engineering, National Aviation University, https://orcid.org/0000-0003-2525-9767.

 Ivan Kostetskyi, National Aviation University

 PhD student of the Department of Applied Mecha-nics and Materials Engineering, National Aviation University

References

Loskutov V.F. , Hizhnyak V.G. Kunickij Yu.A, Kindrachuk M.V. Diffuzionnye karbidnye pokrytiya, K.: Tehkhnika, 1991, 168p.

Hizhnyak V.G., Arshuk M.V. Diffuzionnye pokrytiya s uchastiem hroma i alyuminiya na stali 12H18N9T s barernym sloem nitrida titana , , Izvestie vysshih uchebnyh zavedenij. CHernaya metallurgiya, 2012. No3, P. 69 – 70.

KіndrachukM.V., LabunecV.F., PashechkoM.І., KorbutE.V., Tribologіya , K.: NAU – druk, 2009, 392p.

Kindrachuk M. V. Kombinovanyi metod pidvyshchennia znosostiikosti detalei trybomekhanichnykh system/ O.I. Dukhota, V.V. Kharchenko, N.M. Stebeletska, A.L. Hlovyn // Problemy tertia ta znoshuvannia. - 2022.- №2 (95). S. 46 – 57.

Pat. 103476 Ukrainy. Sposib mekhano – khimiko – termichnoi obrobky vidnovlennia pratsezdatnosti ta otrymannia znosostiikykh shariv azotovanykh stalevykh detalei / Kindrachuk M.V., Klimin V.V., Herasymova O.V., Kostiuk Ye.P., Kharchenko V.V. ta in. № u 201404071; Zaiavl.16.04.2014; opubl. 25.12.2015, Biul. № 24. – 4s.

Kindrachuk M. V. Formuvannia dyskretnoi struktury azotovanykh pokryttiv rivnoi znosostiikosti/ V.V. Kharchenko, O.I. Dukhota, I.A. Humeniuk // Problemy tertia ta znoshuvannia - 2022. - №4 (97). S. 4-9. https://doi.org/10.18372/0370-2197.4(97).16954

Hizhnyak V.G. Budova ta znosostіjkіst karbіdnih і nіtridnih pokrittіv titanu, vanadіyu ta hromu na stalі U8 , V.G. Hizhnyak, N.A. Kurilo, M.M. Shahrajchuk ,, Naukovі vіstі NTUU «KPІ», 2007. No3, P. 105 – 109.

Published

2023-09-27

Issue

Section

Проблеми тертя та зношування