ACOUSTIC EMISSIONS AT THE INSTANT DESTRUCTION OF THE CUTTING TOOL
DOI:
https://doi.org/10.18372/2310-5461.14.5347Keywords:
acoustic emission, composite material, destruction, cutting material, signals parametersAbstract
The outcomes of simulation of acoustic emission resulting signal are reviewed, which one is reshaped at machine work of cutting material, with allowance of instantaneous composite material destruction. Is shown, that at instantaneous destruction of composite material on an acoustic emission resulting signal there is appearance of let of amplitude. Influencing the area of instantaneous destruction of composite material on value of acoustic emission resulting signal of let of amplitude is determined. The estimations ratio of signals parameters are conducted and is rotined, that at the small areas of composite material destruction there is no contribution of a reshaped pulse of acoustic emission signal to a resulting signal.
References
Иванов В. И. Акусто-эмиссионный контроль сварки и сварных соединений / В. И. Иванов, В. М. Белов. - М.: Машиностроение, 1981. - 184 с.
Свириденок А. И. Акустические и электрические методы в триботехнике / А. И. Свиреденок, Н. К. Мышкин, Т. Ф. Калмыков, О. В. Холодилов. - Минск: Наука и техника, 1987. - 280 с.
Бухало О. П. Применение, воспроизведение и сертификация импульсной модели стохастического сигнала // Измерительная техника. - № 6.1997. - С. 24-44.
Lei X., Kusunose K. Quasi-static fault growth and cracking in homogeneous brittle rock under traxial compressing using acoustic emission monitoring // J. of Geophis. Research. - V. 105, № B3, 2000. - P. 6127 - 6139.
Farrelly F. A. Statistical properties of acoustic emission signals from metal cutting processes / F. A. Farrelly, A. Petri, L. Pitolli, G. Pontualeb, A. Tagliani and P. L. Novi lnverardi // J. Acoust. Soc. Am. -- 2004. - V. 1 16, No. 2. - P. 981-986.
Belgassim O. Tool Failure Detection Based on Statistical Analysis of Metal Cutting Acoustic Emission Signals /O. Belgassim, K. Jemielniak // World Academy of Science, Engineering and Technology. - 2011. -V. 74. -P. 551-558.
Lan, M. S. Acoustic emission and machining - process analysis and control / M. S. Lan, D. A. Dornfeld // Adv. Mfg Process., 1986. 1. 1 - 21.
Teti R. Modeling and experimental analysis of acoustic emission from metal cutting /R. Teti, D. A. Dornfeld //' ASME J. of Eng. for Indu. - 1989. - v. 111.-P.229 - 237.
Rangwala, S. and Dornfeld, D. A. A study of acoustic emission generated during orthogonal metal cutting - 1: energy analysis // lnt. J. Mech. Sci. - 1991. - V. 33. - P. 471 - 487.
Saini, D. P. A quantitative model of acoustic emission in orthogonal cutting operations / D. P. Saini, Y. J. Park // J. Mater. Process. Tcchnol., 1996, 58, 343-350.
Liu J. J. Modeling and analysis of acoustic emission in diamond turning / J. J. Lui, D. A. Dornfeld // J. of Manu. Sci. and Eng.- 1996. - V. 118. - P. 199-201.
Blum, T. qnd Inasaki, I. A. study on acoustic emmission from the orthogonal cutting process/ T. Blum, I. A. Inasaki // J. Engng lnd. Trans. ASM, 1990, 12, 203-211.
Araujo, A. J. M. M. Thc generation mechanisrns of acoustic emission in metal cuttingi A. J. M. M. Araujo // PhD Thesis, University of Glamorgan. Wales. 2006. -215 p.
Філоненко С. Ф. Акустична емісія при механічній обробці матеріалів точінням / С.Ф. Філоненко, Т.В. Німченко // Технологические системы. - 2011ю - №3(56). - С. 50-56.
Филоненко С.Ф. Акустическая эмиссия при изменении скорости обработки материалов точением / С.Ф. Филоненко, Т.В. Нимченко, Т.Н. Косицкая // Технологические системы. - 2011. - №4(57). - С. 80-88.
Ren Q. Application of Type-2 fuzzy estimation on uncertainty in machining: An approach on acoustic emission during turning process / Q. Ren, L. Baron, M. Balazinski // NAFIPS 2009: Fuzzy Information Processing Society, Annual Meeting of the North American ( 14-17 June 2009, Cincinnati, OH, USA), - P. 1-6.
Zaghbani I. Evaluation of sustainability of mould steels based on machinability data / I. Zaghbani, V. Songmene and G. Kientzy // Int. J. Machining and Machinability of Materials. - 2010. - V. 7. - No 1-2. - P. 58-81.
Аршинов В.А. Резание металлов и режущий инструмент / А.В. Аршинов. - М.: Машиностроение, 1976. - 400 с.
Филоненко С.Ф. Модель формирования сигнала акустической эмиссии при разрушении композиционных материалов / С.Ф. Филоненко, В.М. Калита, Т.В. Нимченко // технологические системы, 2009. - №2(46). - С. 17-25.
