STRUCTURAL ANALYSIS AND DESIGN APPROACHES FOR A NON-CONTACT ROTATIONAL DRIVE ON GAS-LUBRICATED SUPPORTS AS A SINGLE AND ADJUSTABLE DYNAMIC SYSTEM

Authors

DOI:

https://doi.org/10.18372/0370-2197.2(103).18675

Keywords:

non-contact drive, gas-lubricated bearings, drive design, aerostatic bearings, dynamic system

Abstract

The paper presents a comparative analysis of the designs of non-contact rotational drives on gas-lubricated bearings used in machines and mechanisms for various purposes, such as microturbine generators, two-axis displacement tables, pneumatic spindles, and single-crystal cutting machines. The technical and technological advantages of non-contact direct rotational drives with gas-lubricated bearings are shown; the use of a non-contact drive with an aerostatic bearing in precision positioning mechanisms results in a uniform (smooth) movement with maximum positioning accuracy of the actuator. The approaches to designing the drive as a single and adjustable dynamic system, the characteristics of which are established and adjusted by changing the design, technological parameters, and adjusting the aerostatic supports, are considered. Based on the research, the directions of technical improvement of drives on gas-static supports  which allow to maximize the existing advantages and features of gas-lubricated supports are outlined.

Author Biographies

Oleksii Breshev, National Aviation University

PhD in Engineering, degree applicant, Department of Applied Mechanics and Materials Engineering, National Aviation University, 1, Lubomyr Huzar Ave. 1, Kyiv, Ukraine, 03058

 Oleksandr Bashta, National Aviation University

 PhD in Engineering, Associate Professor, Department of Applied Mechanics and Materials Engineering, National Aviation University, 1, Lubomyr Huzar Ave., Kyiv, Ukraine, 03058

 Pavlo Nosko, National Aviation University

Doctor of Technical Sciences, Professor, Professor of the Department of Applied Mechanics and Materials Engineering, National Aviation University, 1, Lubomyr Huzar Ave., Kyiv, Ukraine, 03058

 Andrii Kharchenko, National Aviation University

Graduate of higher education with a master's degree in specialty 131 «Applied Mechanics», educational and professional program «Applied Mechanics, Standardization and Quality Assessment of Technical Systems», National Aviation University, 1, Lubomyr Huzar Ave., Kyiv, Ukraine

Volodymyr Herasymov, National Aviation University

 Graduate of higher education with a master's degree in specialty 131 «Applied Mechanics», educational and professional program «Applied Mechanics, Standardization and Quality Assessment of Technical Systems», National Aviation University, 1, Lubomyr Huzar Ave., Kyiv, Ukraine

Anton Ladyk, National Aviation University

Graduate of higher education with a master's degree in specialty 131 «Applied Mechanics», educational and professional program «Applied Mechanics, Standardization and Quality Assessment of Technical Systems», National Aviation University, 1, Lubomyr Huzar Ave., Kyiv, Ukraine

References

Peshti, Yu. V. Gazovaya smazka [Tekst] / Yu. V. Peshti: Izd-vo MGTU im. N.E. Baumana, 1993. – 381s.

Pavlyshche, V. T. Osnovy konstruiuvannia ta rozrakhunok detalei mashyn [Tekst] / V. T. Pavlyshche. – Lviv: Afisha, 2003. – 560 s.

Teoriya mehanizmov i mashin. Terminologiya [Tekst]: Ucheb. posob. / N. I. Levitskij [i dr.]; pod red. K. V. Frolova. – M.: Izd-vo MGTU im. N.E. Baumana, 2004. – 80 s.

Nosko, P. The concept of creating non-contact drive for working bodies in machines of various purpose [Text] / P. Nosko, V. Breshev, P. Fil // Polish Academy of sciences in Lublin TEKA Commission of motorization in agriculture. Vol. VIIIA. – Lublin, 2008. – R. 126–133.

Nosko, P. Multiparameter synthesis of non-contact machine drive [Text] / P. Nosko, V. Breshev, P. Fil // Polish Academy of sciences in Lublin TEKA Commission of motorization in agriculture. Vol. IX. – Lublin, 2009. – R. 172–180.

Nosko, P. Structural synthesis and design variants for non-contact machine drives [Text] / P. Nosko, V. Breshev, P. Fil, G. Boyko // Polish Academy of sciences in Lublin TEKA Commission of motorization in agriculture. Vol. XV. – Lublin, 2010. – R. 77–86.

Breshev, V. E. Parametrychnyi syntez kiltsevykh robochykh orhaniv bez mekhanichnykh opor dlia pidvyshchennia tekhnichnoho rivnia mashyn z priamym pryvodom [Tekst]: dys. … kand. tekh. nauk : 05.02.02 / V. Ye. Breshev – Luhansk: Vyd-vo SNU im. V. Dalia, 2006. – 189 s.

Eroshin, S. S. Povyshenie effektivnosti mashin primeneniem rabochih organov bez mehanicheskih opor [Tekst] / S. S. Eroshin, V. E. Breshev // Vostochno-Evropejskij zhurnal peredovyh tehnologij. – 2005. – №5(17). – S. 82 – 85.

Breshev, V. E. Opredelenie kriteriya ustojchivosti vrasheniya rabochih organov mashin i ego eksperimentalnaya proverka [Tekst] / V. E. Breshev // Vostochno-Evropejskij zhurnal peredovyh tehnologij. – 2007. – № 4/4 (28). – S. 21–25.

Nosko, P. Developments in technology of non-contact drives for working machines [Text] / P. Nosko, A. Breshev, P. Fil, V. Breshev // Polish Academy of sciences in Lublin TEKA Commission of motorization in agriculture. Vol. XS. – Lublin, 2010. – R. 209 – 216.

Stvorennia konstruktsii bezposerednoho pryvodu instrumenta ta robochykh orhaniv verstativ s vykorystanniam elektromahnitnykh opor [Tekst]: Zvit pro NTR (zakliuchnyi) / Skhidnoukrainskyi natsionalnyi universytet im. Volodymyra Dalia. – KHN–7–03; – № DR 0103U008250; Inv. № 0205U000311. – Luhansk, 2004. – 164 s.

Breshev, V. E. Opredelenie kriteriya ustojchivosti vozvratno-postupatelnogo dvizheniya ispolnitelnogo organa v beskontaktnom privode [Tekst] / V. E. Breshev // Visnyk Skhidnoukrainskoho natsionalnoho universytetu imeni Volodymyra Dalia. – 2010. – № 2(144). – S. 23 – 28.

Eroshin, S. S. Eksperimentalnoe issledovanie reakcij svobodnogo kolcevogo rotora na radialnuyu nagruzku [Tekst] / S. S. Eroshin, B. I. Nevzlin, V. E. Breshev // Pratsi Luhanskoho viddilennia Mizhnarodnoi Akademii informatyzatsii. – 2005. – № 1(10). – S. 23 – 25.

Breshev, V. E. Issledovanie vliyaniya na ustojchivost dvizheniya rabochih organov mashin sposobov prilozheniya vneshnej nagruzki [Tekst] / V. E. Breshev, A. E. Tretyak // Pratsi Luhanskoho viddilennia Mizhnarodnoi Akademii informatyzatsii. – 2007. – № 2 (15) Ch.II. – S. 10 – 12.

Breshev, V. E. Razvitie tehnologii beskontaktnyh opor i perehod k resursosberegayushej tehnologii beskontaktnogo privoda [Tekst] / V. E. Breshev, A. V. Breshev // Resursozberihaiuchi tekhnolohii vyrobnytstva ta obrobky tyskom materialiv u mashynobuduvanni: Zb. nauk. pr. – Luhansk: Vyd-vo SNU im. V. Dalia, 2010. – S. 153 – 159.

Lyapunov, A. M. Obshaya zadacha ob ustojchivosti dvizheniya [Tekst] / A. M. Lyapunov. – M.-L.: Izd-vo tehniko-teoreticheskoj literatury, 1950. – 472 s.

Merkin, D. R. Vvedenie v teoriyu ustojchivosti dvizheniya / D. R. Merkin. – 4-e izd. – SPb. : Lan, 2003. – 304 s.

Pat. 77529 Ukraina, MPK H01L 21/461. Prystrii dlia rizannia monokrystaliv na plastyny [Tekst] / O. L. Holubenko, S. S. Yeroshyn, B. I. Nevzlin, V. Ye. Breshev; zaiavnyk ta vlasnyk Skhidnoukrainskyi natsionalnyi un-t im. V. Dalia. – № 20041210091 ; zaiavl. 08.12.04 ; opubl. 15.12.06, Biul. № 12. – 4 s.

Pat. 90584 Ukraina, MPK F04D 1/00. Vidtsentrovo-vykhrovyi nasos [Tekst] / P. L. Nosko, P. V. Fil, V. Ye. Breshev, O. P. Karpov; zaiavnyk ta vlasnyk Skhidnoukrainskyi natsionalnyi un-t im. V. Dalia. – № 200811287 ; zaiavl. 18.09.08; opubl. 11.05.10, Biul. № 9. – 4 s.

Opory skolzheniya s gazovoj smazkoj [Tekst] / S. A. Shejnberg [i dr.]; pod red. S. A. Shejnberga. – 2-e izd.: Mashinostroenie, 1979. – 335 s.

Kosmynin, A. V. Podshipniki na gazovoj smazke vysokoskorostnyh rotorov [Elektronnyj resurs] : nauchnaya elektronnaya biblioteka / A. V. Kosmynin, V. S. Vinogradov, V. S. Shetinin, A. V. Smirnov // Sovremennye naukoyomkie tehnologii. – 2009. – №1.

Mikroturbinnyj generator MGT100: OOO NTC Mikroturbinnye tehnologi.23. 41. Magnetostatic Air bearing Nano-precision Long-travel Open loop: AMPHORA Laboratories 2004.

Fedotov, V. O. Hazovi pidvisy shpyndelnykh vuzliv [Tekst]: monohrafiia / V. O. Fedotov, I. V. Fedotova. – Vinnytsia: Vyd-vo VNTU, 2010. – 244 s.

Pat. 98084 Ukraina, MPK F16C 32/06 (2006. 01). Shpyndelnyi vuzol z hazovymy oporamy [Tekst] / P. L. Nosko, V. Ye. Breshev, O. V. Breshev; zaiavnyk ta patentovlasnyk Skhidnoukrainskyi nats. un-t im. V. Dalia. – № a201106472; zaiavl. 23.05.11; opubl. 10.04.12, Biul. №7. – 4 s.

Kharakterystyky konichnykh pidvisiv z pozdovzhnimy hlukhymy mikrokanavkamy postiinoi shyryny i riznym profilem po hlybyni [Tekst] / V. I. Savuliak, V. O. Fedotov, I. V. Vishtak, A. M. Solomon // Visnyk Vinnytskoho politekhnichnoho instytutu. – 2019. – № 1. – S. 78-85.

Vishtak I. V. Vplyv skhidchastykh pozdovzhnikh kanavok na kharakterystyky radialnykh hazostatychnykh opor [Tekst] / I. V. Vishtak, V. O. Fedotov // Visnyk Vinnytskoho politekhnichnoho instytutu. – 2016. – № 5. – S. 110-115.

Fedotova I. V. Spindle on the conical gas suspension their design and research performance / I. V. Fedotova, V. I Savulyak // New Technologies and Products in Machine Manufacturing Technologies, Tehnomus. Suceava, Romania, 2013. – № 20. – R. 234 – 239.

Karpov V. S. Dinamicheskie harakteristiki vertikalnyh gazovyh podshipnikov s profilirovannoj poverhnostyu vala / V. S. Karpov, O. N. Tihonenkova // Issledovanie i primenenie opor skolzheniya s gazovoj smazkoj : Vsesoyuznoe koordinacionnoe soveshanie, 12 – 14 maya 1983 g. : tezisy dokl. – Vinnica, 1983. – S. 46 – 47.

Karpov B. C. Opredelenie kriticheskih parametrov cilindricheskih gazovyh podshipnikov s diskretnym nadduvom / V. S. Karpov, E. G. Grudskaya // Mashinovedenie. – 1982. – № 6 – S. 15 – 18.

Karpov B. C. Vliyanie disbalansa rotora na rabotu sfericheskogo gazovogo podshipnika / V. S. Karpov, L. A. Prokulevich // Mashinovedenie. – 1980. – № 4. – S. 10 – 12.

Podshipniki s gazovoj smazkoj [Tekst] / pod red. N. S. Gressema, Dzh. U. Pauella; per s angl. P. P. Mostovenko [i dr.].: Mir, 1963. – 423 s.

Drozdovich, V. N. Gazodinamicheskie podshipniki [Tekst] / V. N. Drozdovich. – L. : Mashinostroenie, 1976. – 208 s.

Breshev, V. E. Strukturnij sintez bezkontaktnih privodiv robochih mashin [Tekst] / V. E. Breshev, O. V. Breshev // Vostochno-Evropejskij zhurnal peredovyh tehnologij. – 2011. – № 5/3 (53). – S. 6 – 10.

Breshev, A. V. Modernizaciya konstrukcii mnogoopornogo beskontaktnogo privoda na aerostaticheskih podshipnikah [Tekst] / A. V. Breshev, A. P. Karpov, V. E. Breshev // Visnik Shidnoukrayinskogo nacionalnogo universitetu imeni Volodimira Dalya. – 2012. – № 6(177) – Ch.1. – S. 339 – 344.

Breshev, A. V. Modernizaciya odnoopornogo beskontaktnogo privoda dlya uluchsheniya ego tehnicheskih harakteristik [Tekst] / A. V. Breshev // Visnik Shidnoukrayinskogo nacionalnogo universitetu imeni Volodimira Dalya. – 2013. – № 17 (206) – S. 15 – 21.

Published

2024-06-25

Issue

Section

Проблеми тертя та зношування