INTERRELATION ACOUSTIC ENERGY WITH THE COMPOSITE DEFORMATION SPEED AT ITS DESTRUCTION BY VON MISES CRITERION

Authors

  • S. F. Filonenko National Aviation University, Kyiv
  • A. P. Stakhova National Aviation University, Kyiv

DOI:

https://doi.org/10.18372/1990-5548.65.14986

Keywords:

Acoustic emission, acoustic radiation energy, criterion of destruction, energy statistical parameters, composite material

Abstract

Results of theoretical researches of acoustic radiation energy interrelation with composition material deformation speed at its destruction by shear force with use von Mises criterion are considered. It is defined that to increase of deformation speed there is not a linear increase of acoustic radiation energy. Thus, increase of the acoustic emission signals maximum energy advances to increase of their total energy. It is shown that such increase of acoustic radiation energy is caused by increase of composition material process destruction speed. It is defined that the regularity of acoustic emission signals maximum and total energy change with increase deformation speed are well described by power functions.

Author Biographies

S. F. Filonenko, National Aviation University, Kyiv

Aerospace Faculty

Doctor of Engineering Science. Professor

A. P. Stakhova, National Aviation University, Kyiv

Aerospace Faculty

Candidate of Science (Engineering). Associate Professor.

References

F. T. Peirce, “Tensile tests for cotton yarns: “the weakest link” the-orems on the strength of long and of composite specimens,” J. Textile Inst., vol. 17, pp. 355–368, 1926. https://doi.org/10.1080/19447027.1926.10599953

S. Pradhan and B. K Chakrabarti, “Failure properties of fiber bundle models,” Int. J. Modern Phys. B, vol. 17, pp. 5565–5581, 2003. https://doi.org/10.1142/S0217979203023264

D. L. Turcotte, W. I. Newman, and R. Shcherbakov, “Micro and macroscopic models of rock fracture,” Geophys. J. Int., vol. 152, pp. 718–728, 2003. https://doi.org/10.1046/j.1365-246X.2003.01884.x

F. Bosia, N. Pugno, G. Lacidogna, and A. Carpinteri, “Mesoscopic modeling of Acoustic Emission through an energetic approach,” International Journal of Solids and Structures, vol. 45, pp. 5856–5866, 2008. https://doi.org/10.1016/j.ijsolstr.2008.06.019

S. Pradhan, A. Hansen, and B. K. Chakrabarti, “Failure processes in elastic fiber bundles”, Rev. Modern Phys., vol. 82, pp. 499–555, 2010. https://doi.org/10.1103/RevModPhys.82.499

Z. Danku and F. Kun, “Record breaking bursts in a fiber bundle model of creep Rupture,” Frontiers in Physics, vol. 2, Article 8, 8 p., 2014. https://doi.org/10.3389/fphy.2014.00008

A. Hader, Y. Boughaleb, I. Achik, and K. Sbiaai, “Failure kinetic and scaling behavior of the composite materials: Fiber Bundle Model with the local load-sharing rule (LLS),” Optical Materials, vol. 36, pp. 3–7, 2014. https://doi.org/10.1016/j.optmat.2013.07.035

M. Monterrubio-Velasco, F. Zúñiga, V. H. Márquez-Ramírez, and A. Figueroa-Soto, “Simulation of spatial and temporal properties of aftershocks by means of the fiber bundle model,” J. Seismol, vol. 21, pp. 1623–1639, 2017. https://doi.org/10.1007/s10950-017-9687-8

A. Capelli, I. Reiweger, P. Lehmann, and J. Schweizer, “Fiber-bundle model with time-dependent healing mechanisms to simulate progressive failure of snow,” Physical Review E, vol. 98, pp. 023002, 2018. https://doi.org/10.1103/PhysRevE.98.023002

S. Pradhan, J. T. Kjellstadli, and A. Hansen, “Variation of Elastic Energy Shows Reliable Signal of Upcoming Catastrophic Failure,” Frontiers in Physics, vol. 7, Article 106, 10 p., 2019. https://doi.org/10.3389/fphy.2019.00106

A. R. Oskouei and M. Ahmadi, “Fracture Strength Distribution in E-Glass Fiber Using Acoustic Emission,” Journal of Composite materials, vol. 44, no. 6, pp. 693–705, 2010. https://doi.org/10.1177/0021998309347963

F. Raischel, F. Kun, and H. J. Herrmann, “Simple beam model for the shear failure of interfaces,” Phys. Rev.E, vol.72, no. 4, pp. 11, 2005. https://doi.org/10.1103/PhysRevE.72.046126

F. Raischel, F. Kun, and H. J. Herrmann, “Local load sharing fiber bundles with a lower cutoff of strength disorder,” Phys. Rev. E, vol. 74(2), no. 3, pp. 4, 2006. https://doi.org/10.1103/PhysRevE.74.035104

G. Michlmayr, D. Or, and D. Cohen, “Fiber bundle models for stress release and energy bursts during granular shearing,” Phys. Rev. E, vol. 86, no. 06, pp. 130, 2012b. https://doi.org/10.1103/PhysRevE.86.061307

G. Michlmayr, D. Or, and D. Cohen, “Shear-induced force fluctuations and acoustic emissions in granular material”, Journal of Geophysical research: Solid Earth, vol. 118, pp. 6086–6098, 2013. https://doi.org/10.1002/2012JB009987

S. Filonenko, V. Kalita, and A. Kosmach, “Destruction of composite material by shear load and formation of acoustic radiation,” Aviation, vol. 16, no. 1, pp. 5–13, 2012. https://doi.org/10.3846/16487788.2012.679831

S. Filonenko and A. Stakhova, “Studying acoustic emission by fitting the destruction models of a composite according to the OR criterion and Mises criterion,” Eastern-European Journal of Enterprise Technologies, no. 3/9 (105), pp. 39–45, 2020. https://doi.org/10.15587/1729-4061.2020.204820

Downloads

Issue

Section

AUTOMATION AND COMPUTER-INTEGRATED TECHNOLOGIES