APPLICATION OF COBALT COATING BY BIPOLAR ELECTRONIC METHOD

Authors

  • Danilo Zayets National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"
  • Irina Kuzevanova National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"
  • Irina Kovalenko National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"
  • Natalia Vlasenko National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"
  • Artur Zulfigarov National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"
  • Arsenii Shpak National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

DOI:

https://doi.org/10.18372/2306-1472.83.14655

Keywords:

cobalt coating, bipolar electrolyzer, potential distribution, electrolyte of the cobalting, microhardness of precipitate

Abstract

There were proposed an electrochemical method of obtaining a cobalt coating using a bipolar electrolyzer. The potential distribution at the bipolar electrode is more uniform than at the monopolar for others conditions that are the same. The combination of the uniformity with the optimal limit current gives us a try to get compact metal precipitates with microhardness, that is high enough, small crystalline and well-clutched with the base. The obtained results indicate the possibility of using a bipolar electrolyzer in practice for the application of cobalt on wire, and also using it as a protective is decorative.

Author Biographies

Danilo Zayets, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

Student. Department of casting production of ferrous and non-ferrous metals, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

Irina Kuzevanova, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

Assistant, Postgraduate. Department of General and Inorganic Chemistry, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” Education: NTUU KPI, 2006. Research area: chemistry of cobalt compounds.

Irina Kovalenko, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

PhD of Chemical Sciences, Associate Professor. Department of General and Inorganic Chemistry, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” Education: KNUTD, 2005.  Research area: investigation of electrochemistry processes of coating.

Natalia Vlasenko, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

PhD of Chemical Sciences, Associate Professor. Department of General and Inorganic Chemistry, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” Education: NTUU KPI, 1996. Research area: investigation of electrochemistry processes of coating.

Artur Zulfigarov, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

PhD in Chemistry, Senior Leturer. Department of General and Inorganic Chemistry, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” Education: NTUU KPI, 2009. Research area: syntesis and application coordination compounds of 3d metals.

Arsenii Shpak, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

PhD, Associate Professor. Department of General and Inorganic Chemistry, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” Education: KNU of Shevchenko, 2003. Research area: investigation of nanocomposite materials.

References

Bayrachny B.I., Orekhov V.V. (1988). Spravochnik gal'vanika [The reference of the galvanic]. Kharkov: Prapor, p.180. (in Russian)

Yurtov E.V., Matveeva A.G. (2013). Shablon dlya prigotovleniya pokrytiya iz nanostrukturirovannogo nikelya [Template for the production of nanostructured nickel coathing]. Chemistry technology, 14(1), pp. 24-29. (in Russian)

Barsukov, I.V., Johnson, C.S., Doninger, J.E., Barsukov, V.Z. (2006). New Carbon Based Materials for Electrochemical Energy Storage Systems. Springer, p. 512. https://doi.org/10.1007/1-4020-4812-2

Jerebtsov D.A., Tolstoguzov D.S., Shtin S.V. (2017). Elektroosazhdeniye nikelya iz rastvorov soderzhashchikh zhidkiye kristally [Electrodeposition of nickel from solutions containing liquid crystals. Newspaper of South Ural State University, 17(2), pp. 108-118. (in Russian) https://doi.org/10.14529/met170213

Ivanova N.D, Gerasimchuk A.I, Vlasenko N.E. (2002). Kinetika protsessa eletroosazhêdeniya medi (II) iz rozbavlennyakh eletrolitov pri ispol'zovanii bipolyarnogo eletroda [Kinetics of copper (II) electroextraction from dilute electrolytes using a bipolar electrode]. Jurnal prikladnoyi himii, 75(7), pp. 1096-1098. (in Russian) https://doi.org/10.1023/A:1020799810065

Plavan V.P., Vlasenko N.E., Tarasenko N.E., Potaskalov V.A. (2015). Elektrokhimichnyy metod otrymannya spoluk na osnovi oksydu kobalʹtu. [Electrochemical method for producing cobalt oxide compounds]. KNUTD Bulletin "Technical Sciences", 3, pp. 215-219. (in Ukrainian)

Published

04-05-2020

How to Cite

Zayets, D., Kuzevanova, I., Kovalenko, I., Vlasenko, N., Zulfigarov, A., & Shpak, A. (2020). APPLICATION OF COBALT COATING BY BIPOLAR ELECTRONIC METHOD. Proceedings of National Aviation University, 83(2), 77–81. https://doi.org/10.18372/2306-1472.83.14655

Issue

Section

ENVIRONMENT PROTECTION, CHEMICAL AND BIOTECHNOLOGY